How to put on a padel protector step by step (Easy tutorial)

Place a protector on a padel racket It is one of the simplest ways to to protect the frame of the paddle against bumps and scratches, extending its useful life.

Many players ask us how to do it correctly. In our physical store KeepadelIn Madrid We usually install it for clients without any problem, but we also want to show you how to do it yourself at home.

In this tutorial we explain How to put on a padel protector step by step, so that it remains centered, well glued and without bubbles.

How to put on a padel protector step by step

Step 1: Position the protector

The first step consists of place the protector on the padel racket without peeling off the adhesive.

This will allow you to:

• See what remains centered
• Check that it is symmetrical
• Adjust it before gluing it.

A good trick is Use the line of holes in the shovel as a reference, as it will help you know where the protector should start.

Step 2: Peel off only a small part

Once you're clear on where it's going to be placed:

1. Peel off only a small part of the protector.
2. Do not remove all the protective paper at once.
3. Place the beginning of the protector in the area where you started measuring.

This step is important because If you peeled off all the adhesive at once, it would be much more difficult to correct the position..

Step 3: Attach the protector little by little

Now the final installation begins.

Do it very slowly:

• Go pulling the protective paper off little by little
• Meanwhile Press the protector onto the frame
• Always keep the protector on. well centered

The secret lies in don't glue it all at once, but advance progressively until you reach the other end of the blade.

Step 4: Adjust the edges to the plane of the padel racket

Once in place:

• Press down firmly on the entire protector
• Adjust the edges that have been raised
• Make sure the adhesive stays put completely attached to the frame

View this post on Instagram

A post shared by Keepadel - Your padel shop in Madrid (@keepadelshop)

This will make the protector be perfectly integrated into the blade.

Myth: Do you need to use a hairdryer to apply the screen protector?

Many players believe that Using a hairdryer helps the screen protector adhere better., But really there's no need.

Current padel protector adhesives are designed to:

• Stick correctly without heat
• Perfectly adapt to the frame
• Maintain a lasting bond

Therefore, If the protector is positioned correctly, you don't need to use a hairdryer..

Tips to make your sunscreen last longer

• Clean the frame before placing it
• Place it slowly and patiently
• Avoid gluing everything at once.
• Press down firmly on the edges when finished

If you do it correctly, the protector It can extend the lifespan of your racket for many matches..

Frequently asked questions about padel protectors

Do all protectors fit any paddle?

Most are universal, but some are designed for certain frame forms.

Can a padel protector be removed?

Yes, although the adhesive will lose strength and normally Reuse is not recommended.

Does the protector change the weight of the paddle?

Yes, but very little (usually between 5 and 10 grams), something that barely affects the game.